Belltech 4"-5" Front / 5"-7" Rear Street Performance Shock Set - 1988-1998 Chevy/GMC C1500

Already running a big drop and your stock-length shocks are topping out or bottoming out? The Belltech Street Performance Shock Set (Part# 9522) is engineered specifically for 1988-1998 Chevy/GMC C1500 2WD trucks dropped 4"-5" up front and 5"-7" in the rear, giving you the correct shock travel and valving for your exact drop height instead of trying to make a stock-length shock work in a application it was never designed for.

Running the wrong shock length after a big drop is one of the most common mistakes builders make: too-long shocks top out and clang on rebound, while shocks that are too short can bottom out harshly or lose damping control entirely. Belltech's Street Performance shocks are valved and sized specifically for this drop range, so you get proper damping control, a controlled ride, and none of the clunking or harsh bottoming that comes from mismatched shock length.

Belltech has been engineering application-specific shocks for lowered trucks for decades, and this set reflects that same attention to detail. These aren't generic gas shocks; they're valved specifically to complement a big-drop OBS truck's suspension geometry and spring rates.

Fits: Chevrolet C1500 2WD, 1988-1998, with 4"-5" front / 5"-7" rear drop.

If you're running a serious drop and your ride quality has gotten worse instead of better, mismatched shocks are almost always the culprit. Installation is a simple bolt-on shock swap using basic hand tools, no special equipment needed. Correct your shock length and valving for your specific drop with this Belltech set, and feel the difference in ride control immediately.